Cogeneration Technologies
A Cogeneration Technologies Company
Cooler, Cleaner, Greener Power & Energy Solutions 

Home | Contact Us | Links

 
 

Flare Gas Recovery
www.FlareGasRecovery.com

 






To advertise on this site, call or email
The Renewable Energy Institute

email:  info@RenewableEnergyInstitute.org

 

Sales, Engineering, Products, Services and Information

We provide Flare Gas Recovery systems and Engineering, Procurement and Construction for cooler, cleaner, greener power and energy systems.  We also offer energy-saving technologies that include; Absorption Chillers, Adsorption Chillers, Automated Demand Response, Cogeneration, Demand Response Programs, Demand Side Management, Energy Master Planning, Engine Driven Chillers, Trigeneration and Energy Conservation Measures.  

Our company provides turn-key project solutions that include all or part of the following: 

  • Engineering and Economic Feasibility Studies 

  • Project Design, Engineering & Permitting

  • Project Construction

  • Project Funding & Financing Options

  • Shared/Guaranteed Savings program with no capital requirements. 

  • Project Commissioning 

  • Operations & Maintenance 

Additional EPC services include:

For more information: call us at: 832-758-0027

About Flare Gas Recovery.  What is Flare Gas Recovery?

Flare Gas Recovery, Vapor Recovery, Waste to Energy and Vapor Recovery Units recover valuable "waste" or vented fuels that can be used to provide fuel for an onsite power generation plant.  Already have other technologies such as thermal oxidizers or incinerators to eliminate these problems? We can engineer a solution that provides economic gain eliminates environmental exposure with these valuable resources! 


Our waste-to-energy and waste to fuel systems significantly or entirely, reduces your facility's emissions (such as NOx, SOx, H2S, CO, CO2 and other Hazardous Air Pollutants/Greenhouse Gases) and convert these valuable emissions from an environmental problem into a new cash revenue stream and profit center.

Flare gas recovery and vapor recovery units can be located in hundreds of applications and locations.  At a Wastewaster Treatment System (or Publicly Owned Treatment Works - "POTW") gases from the facility can be captured from the anaerobic digesters, and manifolded/piped to one of our onsite power generation plants, and make, essentially, "free" electricity for your facility's use.  These associated "biogases" that are  generated from municipally owned landfills or wastewater treatment plants have low btu content or heating values, ranging around 550-650 btu's.  This makes them unsuitable for use in natural gas applications. When burned as fuel to generate electricity, however, these gases become a valuable source of "renewable" power and energy for the facility's use or resale to the electric grid. 

Additionally, if heat (steam and/or hot water) is required, we will incorporate our cogeneration or trigeneration system into the project and provide some, or all, of your hot water/steam requirements. Similarly, at crude oil refineries, gas processing plants, exploration and production sites, and gasoline storage/tank farm site, we convert your facility's "waste fuel" and environmental liabilities into profitable, environmentally-friendly solutions.

Our Flare Gas Recovery and Vapor Recovery units that are designed and engineered for these specific applications.  It is important to note that there are many internal combustion engines or combustion turbines that are NOT suited for these applications.  Our systems are engineered precisely for your facility's application, and our engineers know the engines and turbines that will work as well as those that don't.  More importantly, we are vendor and supplier neutral!  Our only concerns are for the optimum system solution for your company, and we look past brand names and sales propaganda to determine the optimum system, which may incorporate either one or more; gas engine genset(s) or gas turbine genset(s), in cogeneration or trigeneration mode - in trigeneration mode, we incorporate absorption chillers to make chilled water for process or air-conditioning, fuel gas conditioning equipment and gas compressor(s). 

Our turn-key systems includes design, engineering, permitting, project management, commissioning, as well as financing for our qualified customers. Additionally, we may be interested in owning and operating the flare gas recovery or vapor recovery units. For these applications, there is no investment required from the customer.

For more information, please provide us with the following information about the flare gas or vapor:   

  • Type of gas being flared or vented (methane, bio-gas, landfill, etc.).

  • Chromatograph Fuel/Gas analysis which provides us with the btu's (heating value) and the composition of the gas and its' impurities such as methane (and the percentage of methane), soloxanes, carbon dioxide, hydrogen, hydrogen sulfide, and any other hydrocarbons. 

  • Total amount of gas available, from all sources, at the facility.  


* From the Department of Energy website with permission