Jatropha Biodiesel
www.JatrophaBiodiesel.com

Our New Biodiesel Refineries Will Produce B100 Biodiesel 
for as Little as $.90/gallon!
B100 Biodiesel: 100% Clean, 100% Renewable, 100% Affordable Fuel

Our company builds new Biodiesel Refineries throughout the U.S. and now, developing countries with specialized feedstocks that include coconut, palm oil and our agricultural team is now reviewing the opportunities of making B100 Biodiesel from Jatropha for what we call "Jatropha Biodiesel."  

In association with a major U.S. university, we incorporate the latest technologies in the production of B100 Biodiesel from oilseed crops, that will provide our biodiesel refineries with the highest efficiencies. We also are an importer of (vegetable) energy oils, where we refine it into Biodiesel fuel for use in our cogeneration and trigeneration power plants. Additionally, we buy/sell/broker (vegetable) energy oils in the international market

For more information, call 832-758-0027

Cogeneration Technologies, is based in Houston, Texas and provides the following power and energy project development services: 

• Project Engineering Feasibility & Economic Analysis Studies  

• Engineering, Procurement and Construction

• Environmental Engineering & Permitting 

• Project Funding & Financing Options; including Equity Investment, Debt Financing, Lease and Municipal Lease

• Shared/Guaranteed Savings Program with No Capital Investment from Qualified Clients 

• Project Commissioning 

• 3rd Party Ownership and Project Development

• Long-term Service Agreements

• Operations & Maintenance 

• Green Tag (Renewable Energy Credit, Carbon Dioxide Credits, Emission Reduction Credits) Brokerage Services; Application and Permitting

We are specialists in Renewable Energy Technologies, Demand Side Management and in developing clean power/energy projects that will generate a Renewable Energy Credit,  Carbon Dioxide Credits and/or Emission Reduction Credits.  Through our strategic partners, we offer "turnkey" power/energy project development products and services that may include; Absorption Chillers, Adsorption Chillers, Automated Demand Response, Biodiesel Refineries, Biofuel Refineries, Biomass Gasification, BioMethane, Canola Biodiesel, Coconut Biodiesel, Cogeneration, Concentrating Solar Power, Demand Response Programs, Demand Side Management, Energy Conservation Measures, Energy Master Planning, Engine Driven Chillers, Solar CHP, Solar Cogeneration, Rapeseed Biodiesel, Solar Electric Heat Pumps, Solar Electric Power Systems, Solar Heating and Cooling, Solar Trigeneration, Soy Biodiesel, and Trigeneration.

For more information: call us at: 832-758-0027

Look at the past 6 years production of B100 Biodiesel in the U.S. :

1999:  500,000 gallons of B100 Biodiesel were produced in the U.S.  
2004:  25 million gallons of B100 Biodiesel produced in the U.S.

THAT'S A 5,000% INCREASE IN ONLY 5 YEARS!

2005:  75 million gallons of B100 Biodiesel produced in the U.S.   

We are planning new Biodiesel plants throughout the United States , the Caribbean , Central America and Southeast Asia . We develop, build, and own B100 Biodiesel plants that use a variety of feedstocks, including;

*  Canola Biodiesel from coconuts - Investments for new Biodiesel
plants now planned for locations in the U.S. (Hawaii), Caribbean, Asia,
Central America and Southeast Asia (See our website at: 
www.CanolaBiodiesel.com for more information)

*  Coconut Biodiesel from coconuts - Investments for new Biodiesel
plants now planned for locations in the U.S. (Hawaii), Caribbean, Asia,
Central America and Southeast Asia (See our website at: 
www.CoconutBiodiesel.com for more information)

*  Jatropha Biodiesel from the Jatropha Curcas plant Investments for new Biodiesel plants now planned for locations in Asia, India, and Southeast Asia  (See our website at:  www.JatrophaBiodiesel.com for more information)

*  Jojoba Biodiesel from the Jatropha Curcas plant - Investments for new Biodiesel plants now planned for locations in Asia, India, and Southeast Asia  (See our website at: www.JojobaBiodiesel.com for more information)

*  Palm Oil Biodiesel from Palm Trees - Investments for new Biodiesel plants now planned for locations in the U.S., Caribbean, Asia, Central America and Southeast Asia  (See our website at:
www.PalmOilBiodiesel.com for more information)

*  Rapeseed Biodiesel from coconuts - Investments for new Biodiesel plants now planned for locations in the U.S. (Hawaii), Caribbean, Asia, Central America and Southeast Asia (See our website at: 
www.RapeseedBiodiesel.com for more information)

*  Soy Biodiesel from Soybean Oil - Investments for new Biodiesel 
plants now planned for locations in the U.S., Asia, Central America and Southeast Asia (See our website at:  www.SoyBiodiesel.net for more information)

Our New Biodiesel Plants:

1. Large market potential for profits in new B100 Biodiesel production.
2. Our B100 Biodiesel plants are "optimum" designs.
3. We have markets for all of our B100 Biodiesel production, as well as the co-product(s).
4. We provide the "turnkey" project development.  
5. Help us make the world a "cooler, cleaner, greener" place to live!
6. We are also making investments in land that is located near major feedstock/plantations and locations of the following B100 Biodiesel feedstocks:
   
   * Coconuts
   * Jatropha
   * Palm Tree
   * Soybean

Grow Your Own "Green" BioDiesel
Increase Profits for Farmers, Improve the Local and Global Economy and Ecology, 
Decrease Pollution and End the Monopoly of OPEC/Foreign Supplies of "Dirty" Fuels!  

At an average production rate of 260 - 300 gallons per acre, Coconut Oil ("BioDiesel") is one of the most efficient energy crops, and second only to Crude Palm Oil that is produced from palm trees, and at an average yield of 600-700 gallons per acre.

What is Biodiesel?

Biodiesel is an environmentally- friendly, renewable energy source that could also produce cost savings for taxpayers and private businesses and is produced from farmers that grow various fuel crops.  

Initial research conducted by the University of Saskatchewan and the AAFC Saskatoon Research Centre has found that each ton of renewable biodiesel fuel saves five times its weight in diesel fuel. As well, engines using biodiesel demonstrate wear rates as much as 50% lower than those using regular commercial fuels – effectively doubling engine life.

Canola is a member of the Brassica Family, which includes broccoli, cabbage, cauliflower, mustard, radish, and turnip. It is a variant of the crop rapeseed. Grown for its seed, the seed is crushed for the oil contained within. After the oil is extracted, the by-product is a protein-richmeal used by the intensive livestock industry. 

Canola is a very small seed, which means sowing depth must be controlled. The current sowing practice is to cover the seed lightly with soil, which provides more protection from drying out after germination. 

Canola is generally sown in autumn and develops over winter, with flowers emerging in the spring and is harvested early summer. With a growing period of around 180-200 days climatic effects such as sudden heat waves can reduce yields and hot dry conditions can limit its oil content. Summer weather ensures low moisture (less than 6%) at harvest. Carry-in stocks of canola are minimal because of a lack of on-farm storage. Canola is a good rotational crop, acting as a break crop for cereal root diseases. However for disease-related reasons, a rotation period of 3-5 years is required for canola crops. of iodine in grams absorbed per 100 ml of oil is then the IV. The higher the IV, the more unsaturated (the greater the number of double bonds available) is the oil and the higher the potential to ‘gum up’ when used as a fuel in an engine. Though some oils have a low IV and are suitable without any further processing other than extraction and filtering, the majority of vegetable and animal oils have an IV which does not permit their use as a neat fuel. 

Generally speaking, an IV of less than about 25 is required if the neat oil is to be used in unmodified diesel engines and this severely limited the types of oil that can be used.

The IV can be easily reduced by hydrogenation of the oil (reacting the oil with hydrogen), the hydrogen breaking the double bond and converting the fat or oil into a more saturated oil and reducing the tendency of the oil to polymerise. However this process also tends to increase the melting point of the oil and converts the oil into margarine. Only coconut oil has an IV low enough to be used without any special precautions in a unmodified diesel engine. However with a melting point of 25°C, the use of coconut oil in cooler areas would obviously lead to problems. 

Linseed oil could be mixed with petroleum diesel at a ratio of up to 1:8 to give an equivalent IV in the mid-twenties. Likewise coconut oil can be thinned with diesel or kerosene to render it less viscous in cooler climates. Obviously the solubility of the oil in petroleum also needs to be taken into account. Another method is to emulsify the oil or fat with ethanol. Most vegetable oils are a mixture of different esters such as oleic acid (main constituent of olive oil), ricinoleic acid (main constituent of castor oil), linoleic acid (main constituents of linseed oil), palmitic acid (main constituent of palm kernel oil) and so on. In an analogous way to that in which crude oil is refined to make a useable automotive fuel, canola oil needs to be transesterified to make an automotive fuel that is useable in unmodified diesel engines. 

When the oil is processed in a transesterfication process, the various fatty acids react with the alcohol to form a mixture of lighter esters and glycerol. The name of the specific fuel is called after the plant (or animal) source plus the alcohol. Made from rapeseed oil and methanol, the biodiesel is called Rape Methyl Ester (RME), from canola oil and ethanol, Canola Ethyl Ester (CEE), and from used McDonald’s cooking oil and ethanol or methanol, ("McDiesel").

What is Rapeseed Biodiesel?

Rapeseed, some varieties of which are used to make mustard and others to make canola oil, is the preferred biodiesel feedstock in Europe. Depending on the variety, rapeseed oil contains about 40 to 50 percent of its weight in rapeseed is oil, as compared with only 20 percent for soybeans. It can be planted and harvested with the same equipment used for small grains. In addition, rapeseed oil offers certain advantages in the production of biodiesel.

What is "Global Warming Potential?

Global Warming Potential (GWP) is the index used to translate the level of emissions of various gases into a common measure in order to compare the relative radiative forcing of different gases without directly calculating the changes in atmospheric concentrations. 

GWPs are calculated as the ratio of the radiative forcing that would result from the emissions of one kilogram of a greenhouse gas to that from emission of one kilogram of carbon dioxide over a period of time (usually 100 years). Gases involved in complex atmospheric chemical processes have not been assigned GWPs due to complications that arise.

Greenhouse gases are expressed in terms of Carbon Dioxide Equivalent. The International Panel on Climate Change (IPCC) has presented these GWPs 
and regularly updates them in new assessments. The instantaneous radiative forcing that results from the addition of 1 kilogram of a gas to the atmosphere, relative to that of 1 kilogram of carbon dioxide. 

Over a time horizon of 100 years, methane has a GWP of 24.5, nitrous oxide has a GWP of 320, and CFC-11 has a GWP of 4,000

What Are Greenhouse Gases?

Some greenhouse gases occur naturally in the atmosphere, while others result from human activities. Naturally occurring greenhouse gases include water vapor,
carbon dioxide, methane, nitrous oxide, and ozone. Certain human activities, however, add to the levels of most of these naturally occurring gases:

Carbon dioxide is released to the atmosphere when solid waste, fossil fuels (oil, natural gas, and coal), and wood and wood products are burned. 

Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from the decomposition of organic wastes in municipal solid waste landfills, and the raising of livestock. More information on methane.

Nitrous oxide is emitted during agricultural and industrial activities, as well as during combustion of solid waste and fossil fuels. 

Very powerful greenhouse gases that are not naturally occurring include hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), and sulfur hexafluoride (SF6), which are generated in a variety of industrial processes.

Global Warming Potentials and Atmospheric Lifetimes (Years)

^a 100 year time horizon
^b The methane GWP includes the direct effects and those indirect effects due to the production of tropospheric ozone and stratospheric water vapor. The indirect effect due to the production of CO₂ is not included.

We provide turnkey services that removes Nitrogen Oxides, Nitrous Oxides and Sulfur Oxides. Unlike most companies, we are equipment supplier/vendor neutral. This means we help our clients select the best equipment for their specific application. This approach provides our customers with superior performance, decreased operating expenses and increased return on investment. Selective Catalytic Reduction systems are frequently used in removing NOx.

What are Nitrogen Oxides?

Nitrogen oxides, or NOx, is the generic term for a group of highly reactive gases, all of which contain nitrogen and oxygen in varying amounts. Many of the nitrogen oxides are colorless and odorless. However, one common pollutant, nitrogen dioxide (NO₂) along with particles in the air can often be seen as a reddish-brown layer over many urban areas.

Nitrogen oxides form when fuel is burned at high temperatures, as in a combustion process. The primary sources of NOx are motor vehicles, electric utilities, and other industrial, commercial, and residential sources that burn fuels.

Reasons for Concern

How can Nitrogen Oxides be Removed from the Environment?

Selective Catalytic Reduction (SCR) is a proven and effective method to reduce nitrogen oxides which is an air pollutant associated with the power generation process. Nitrogen oxides are a contributor to ground level ozone. 

How does Selective Catalytic Reduction work?

SCR Systems work similar to a catalytic converter used to reduce automobile emissions. Prior to exhaust gases going up the smokestack, they will pass through the SCR System where anhydrous ammonia reacts with nitrogen oxide and converts it to nitrogen and water.

* Some of the above information from the Department of Energy website with permission.

Biofuel Industries
Cogeneration Technologies
Renewable Energy Technologies
Trigeneration Technologies
EcoGeneration Solutions, LLC
Copyright © 2002   All Rights Reserved